SPIDERMAN V2.20 TUTORIAL!!!

Hey guys, you will have noticed that your admin has been away for awhile. Both bryce and myself have just gotten into our holidays so we will be spending a lot more time around the site and spending well needed time doing some maintenance work. This site has certainly grown since it's debut last year, and we look forward to seeing it continue to grow over the years.

Also we have 2 n...

We have posted a mini-forum for any other CECT phone models, we will make the consideration of making the CECT P168 Forum a CECT forum, but not in the near future, So all other CECT phone users, go check it out!

With the number of members rapidly increasing, we have decided to put a rules section on the forum, it is located here.

So make sure you read it, to save yourself any hastles.
Thanks Smile

Admin · Subject: SPIDERMAN V2.20 TUTORIAL!!! Sun Aug 10, 2008 8:08 pm

sorry about the horrible english, it was translated from german

original text here: http://www.chinamobiles.org/showthread.php?t=6129

First of all, you need a special cable that is passed to the COM port of the computer can be connected.

You can buy the cable (china 23) from website mentioned on this forum.

It then also connects the cable to the PC and the mobile phone

Connect Now you start the program Spiderman and expresses to Connect

The phone is (hopefully) can be detected and at the Open Firmware choose the man on the phone flash.

Pressing on Flash now, the message "Press ON / OFF key", believe it briefly until it goes on and it begins to rattern.

After a few seconds, an error message that the firmware is for the mobile phone is, Yes, even if there is truth that could destroy the phone.

Ne good half hour and it would then turn, "COM port closed successful".

Now the cables away, battery out and back here, and then turn läufts

jdtb22 · Newbie Posts: 8 Join date: 2008-08-05

ive looked everywhere on the website you listed but i cant find where i can buy that cable. could you please help

Stealthius · Subject: Re: SPIDERMAN V2.20 TUTORIAL!!! Mon Aug 25, 2008 7:52 am

Here is the link Chine 23 cable

_________________
P168+ Version: YH718_EN_25_06B_V1.1.6 | Branch: 06B, MT25_06B | Build Time: 2008/01/19 00:37 | BB chip MT6225, E03

twgirl · Novice Posts: 71 Join date: 2008-07-29

do u know if this is a good place to buy the cable from?

Stealthius · Subject: Re: SPIDERMAN V2.20 TUTORIAL!!! Tue Aug 26, 2008 12:56 am

Judee bought her cable there, she got it in 2 days, see post

link

_________________
P168+ Version: YH718_EN_25_06B_V1.1.6 | Branch: 06B, MT25_06B | Build Time: 2008/01/19 00:37 | BB chip MT6225, E03

twgirl · Novice Posts: 71 Join date: 2008-07-29

great!

thanks What a Face

DBoca · Newbie Posts: 9 Join date: 2008-09-06

this is for re-flash ??
my cel no working after change the mode engeneer
the option High Speed SIM

this is for repair??

Salu2

klsmurf · 1337 Posts: 301 Join date: 2008-07-20 Location: Florida

Yes, just follow the tutorials and good luck!

_________________
remember the ultimate answer is "42"

reptooyep · Newbie Posts: 9 Join date: 2009-02-12

Hello everybody,

I've downloaded spiderman but i would like to know how to change the com port, it's not accessible to click and my usb cable is connect to another port.

thanks

testing567 · Subject: Re: SPIDERMAN V2.20 TUTORIAL!!! Fri Feb 13, 2009 3:34 am

Click "connect" first, then check off "set new port." Also, I assume that your USB cable is a flashing cable and not the USB cable the phone came with.

_________________
How to readback/backup your firmware to your computer: Click

How to unbrick/install firmware: Click

How to edit graphics on your phone's firmware: Click

antamidhya · Newbie Posts: 8 Join date: 2009-07-04

I have a China iphone clone model: Jiaxin V51, very similar to P168.
It has only 2 buttons(1st at top to on & off; 2nd centrally below the touch screen). Dual Sim card, with 8GB microSDHC. I was trying to enable com port and accidentally clicke on "High Speed SIM". Now the phone is dead.

The phone details i got from factory mode when it was working normal:

[Version]
E800_XYZ1F11NTV.00.1
[BRANCH]: GEMINI
BUILD: BUILD_NO
SERIAL#:E80001070106793

[BUILD TIME]
2008/12/03 09:27
IMEI: ***0510********
***0510********

BB Chip: MT6225, E05
DSP Code: 2006.06.14
DSP Patch:1.0
MS Board: EVEN6225_GEMINI_HW

Working shortcuts for my phone:
Change languge: *#0044# + dial for English
Check Version: *#66*#
IMEI number:*#06#
Factory settings:*#3646633#
auto test:*#87#
Password for restore factory settings: 1122

I want to resovle it using my PC and flashing cable. In this context I have these questions:
1. Can any USB A to 9 pin serial cable available at PC Peripherals work as flashing cable?
2. There are many types of flashing cables at ipmart.com. Please suggest me which cable is

compatible for my phone? China23 or China8 or anyother?
3. Can you provide me this flash file version?

I will be very glad if you can help me with my problem.
antamidhya@gmail.com